Open Source Windows Battery Monitoring Software

Apcupsd is a program for monitoring UPSes and performing a graceful computer shutdown in the event of a power failure. It runs on Linux, Mac OS/X, Win32, BSD, Solaris, and other OSes.

Coffee will keep your computer wide awake while your downloads or network transfers complete. Coffee prevents standby when your traffic speed on a selected network adapter is above the user configurable threshold. [Licence is GPLv3] as at bitcoin block (0000000000000000001b34dafd32802dd18c0303c73b2af6b1969be7c9bbccbe)

WinMust is a free Windows application designed to monitor and control a compatible Mustek brand UPS. It displays status information, such as battery voltage or backup operating mode and can shut-down the host computer, should the UPS run out of battery.

A very small and simple application that gives you time remaining to charge or discharge your battery (even if windows cannot).The final goal is to have an accurate timer that will tell how much time until your computer dies or fully charged.

A system tray application to monitor the battery charge level. Originally written to overcome a bug in Windows7 where the user was never notified of the battery getting to the low/critical state and havign the chance to save their work.

PowerChanger is a tiny GUI wrapper for the Windows powercfg utility that lets you easily switch between power schemes in Windows. The GUI lists all saved power schemes in Windows and allows you to choose between all saved Windows power schemes.

Coffee will keep your computer wide awake while your network is active or a program. Coffee prevents standby when your traffic speed on a selected network adapter is above the user configurable threshold or specific software selected. It will keep computer awake without disturbing monitor sleep mode. Have option to delay xx minutes after software does not meet sleep block settings. Have option to send up key press.

Waik is a useful system utility for power management of your PC. It is written for Windows, and it features automatic stand by mode, shutdown, and even waking up from sleeping(stand by) mode at the set by you time!

This application (a couple of PHP-scripts) allows webusers to wake up WOL-enabled remote hosts.

Notebook battery drain meter (NDM) is a freeware very simple application running under Windows platform (tested on XP and 7, requires WMI - should be present on current Win OSes). It solves a problem of observation and alerting of NB power consumption when running on batteries. NDM works as follows: Decompress the app into desired directory and run. NDM creates TRAY icon, which shows current power drain from battery in Watts. Main window open first time and allows to configure alerting tray color (when done click Save to tray). There is possibility to set up Watt limit to tray icon background color change to Green, Yellow, Red. It also can blink from certain limit. Main window can shown / hidden by click on tray icon. Right click opens menu with Exit application item. Your settings are stored in standard ini file, autostart can be selected by writing to the registry.

Displays information about the laptop battery. The project is still under development. A new version is expected soon.

This simple notebook battery utility shows in your systray info about your notebook battery life. It works even with batteries which does not support extended features. Shows remaining battery life, charging progress, assumptions...

thuBatteryTools allows controlled shut downs of UPS connected servers (Windows, Linux, ESXi) in your network in case of power loss. Requirements - Windows with .NET Framework 4.5.2 or newer - Direct attached (USB) UPC battery on the server running thuBatteryTool

Simple CGI viewer for CyberPower UPS PowerPanel commands on *NIX. Written in perl; uses POSIX, CGI, CGI::Carp. Single cgi file in download, to be used in conjunction with CyberPower's powerpanel utility.

The goal of EnerWare is to design and create language primitives and/or extensions that enable the support and provision for energy awareness in resource-constrained systems such as embedded sensors and large-scale servers.

This project is aimed to develop an Hardware Monitor & Protection System for PCs using PICmicros. This project is divided into two branches: the first one involves microcontroller's firmware, the second one software used to manage the PIC via COM po

A laptop battery meter for the KDE panel. KBatt can display current power status (AC online, offline), battery level, as well as remaining time.

MultiWOL is a Perl CGI script for power up computers remotely that designed with multiuser environment in mind. MultiWOL offers capability of waking up multiple hosts simultaneously with automatic check that remote host has or may has not awoken.

Eine Sammlung von kleinen Tools und Programmen, die nur andere Leute nerven sollen. Dabei werden bestimmte Vorgänge simuliert und vorgetäuscht. Durch die Tools entsteht keinerlei Schaden. (... außer vllt. ein Schockzustand) Es handelt sich NICHT um Viren oder Trojaner bzw. andere Schadsoftware

The NU PDVS project is an effort to minimize power consumption on various chipset platforms using process-driven voltage scaling technology.

Optimize a computer with windows in few minutes ! -Loustak

PTDsign presents: PTSleep, the opposite of an alarm! This you would use to wake yourself, but what do you do if you want the opposite: Sleeping? This sleeper! Play some nice music and let me fade the volume down for you and turn your pc off.

SICM - Simple Infrastructure Capacity Monitor. Written in Perl for Win32 & Linux. SICM monitors, graphs and alerts the capacity of devices using snmp, ping & custom modules. Runs 24*7, recording results for later reference via a menu-driven web browser.

Schedule turn off the computer.

a java app to shutdown your system at a preset time CHECK OUT AND SUPPORT MY LATEST ANDROID PROJECTS IN HERE: https://play.google.com/store/apps/developer?id=Deepak+PK