Showing 6133 open source projects for "gnu"

View related business solutions
  • Gemini 3 and 200+ AI Models on One Platform Icon
    Gemini 3 and 200+ AI Models on One Platform

    Access Google's best plus Claude, Llama, and Gemma. Fine-tune and deploy from one console.

    Build generative AI apps with Vertex AI. Switch between models without switching platforms.
    Start Free
  • 8 Monitoring Tools in One APM. Install in 5 Minutes. Icon
    8 Monitoring Tools in One APM. Install in 5 Minutes.

    Errors, performance, logs, uptime, hosts, anomalies, dashboards, and check-ins. One interface.

    AppSignal works out of the box for Ruby, Elixir, Node.js, Python, and more. 30-day free trial, no credit card required.
    Start Free
  • 1
    Arduino core for the ESP32

    Arduino core for the ESP32

    Arduino core for the ESP32

    ESP32 is a single 2.4 GHz Wi-Fi-and-Bluetooth SoC (System On a Chip) designed by Espressif Systems. ESP32 is designed for mobile, wearable electronics, and Internet-of-Things (IoT) applications. It features all the state-of-the-art characteristics of low-power chips, including fine-grained clock gating, multiple power modes,and dynamic power scaling. For instance, in a low-power IoT sensor hub application scenario, ESP32 is woken-up periodically and only when a specified condition is...
    Downloads: 205 This Week
    Last Update:
    See Project
  • 2
    Betaflight

    Betaflight

    Open Source Flight Controller Firmware

    Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much...
    Downloads: 239 This Week
    Last Update:
    See Project
  • 3
    ExplorerPatcher

    ExplorerPatcher

    This project aims to enhance the working environment on Windows

    ExplorerPatcher is a lightweight Windows utility that brings back classic Windows 10 UI elements in Windows 11, including taskbar styles, Start menu layouts, and Alt+Tab behavior. It works via injecting patches into Explorer, configurable through a Properties panel post-install.
    Downloads: 95 This Week
    Last Update:
    See Project
  • 4
    Sandboxie

    Sandboxie

    Sandboxie Plus & Classic

    Sandboxie (and its enhanced fork Sandboxie Plus) is an open-source sandboxing tool for Windows NT-based systems. It creates isolated virtual environments in which applications can run safely without permanently modifying the system, ideal for testing untrusted software. Sandboxie Classic has the old no longer developed MFC-based UI, hence it lacks native interface support for Plus features. Although some of the missing features can be configured manually in the Sandboxie.ini configuration...
    Downloads: 137 This Week
    Last Update:
    See Project
  • $300 in Free Credit Towards Top Cloud Services Icon
    $300 in Free Credit Towards Top Cloud Services

    Build VMs, containers, AI, databases, storage—all in one place.

    Start your project in minutes. After credits run out, 20+ products include free monthly usage. Only pay when you're ready to scale.
    Get Started
  • 5
    nwipe

    nwipe

    nwipe secure disk eraser

    nwipe is a fork of the dwipe command originally used by Darik's Boot and Nuke (DBAN). nwipe was created out of a need to run the DBAN dwipe command outside of DBAN, in order to allow its use with any host distribution, thus giving better hardware support. nwipe is a program that will securely erase the entire contents of disks. It can wipe a single drive or multiple disks simultaneously. It can operate as both a command line tool without a GUI or with a ncurses GUI.
    Downloads: 111 This Week
    Last Update:
    See Project
  • 6
    WSL2-Linux-Kernel

    WSL2-Linux-Kernel

    The source for the Linux kernel used in Windows Subsystem for Linux 2

    The WSL2-Linux-Kernel repo contains the kernel source code and configuration files for the WSL2 kernel. If you discover an issue relating to WSL or the WSL2 kernel, please report it on the WSL GitHub project. It is not possible to report issues on the WSL2-Linux-Kernel project. Instructions for building an x86_64 WSL2 kernel with an Ubuntu distribution are provided. The number one way that we recommend you run Linux distributions is by installing Windows Terminal. Using Windows Terminal...
    Downloads: 122 This Week
    Last Update:
    See Project
  • 7
    Luma3DS

    Luma3DS

    Noob-proof (N)3DS Custom Firmware

    Luma3DS is a program to patch the system software of (New) Nintendo (2)3DS handheld consoles "on the fly", adding features such as per-game language settings, debugging capabilities for developers, and removing restrictions enforced by Nintendo such as the region lock. It also allows you to run unauthorized ("homebrew") content by removing signature checks. To use it, you will need a console capable of running homebrew software on the Arm9 processor. Since v8.0, Luma3DS has its own in-game...
    Downloads: 73 This Week
    Last Update:
    See Project
  • 8
    VirtualBox

    VirtualBox

    Virtualization software for x86_64 hardware

    VirtualBox is a powerful open-source full virtualization software that allows a user to run one or more “guest” operating systems simultaneously inside “virtual machines” on a single physical “host” machine. It supports a wide variety of host platforms (Linux, Windows, macOS, Solaris, etc.) and guest OSes, enabling, for example, running Linux on a Windows PC, running Windows Server on a Linux host, or even legacy OSes in a controlled environment. This flexibility makes VirtualBox ideal for...
    Downloads: 100 This Week
    Last Update:
    See Project
  • 9
    86Box

    86Box

    Emulator of x86-based machines based on PCem

    86Box is a low level x86 emulator that runs older operating systems and software designed for IBM PC systems and compatibles from 1981 through fairly recent system designs based on the PCI bus. Easy to use interface inspired by mainstream hypervisor software. Low level emulation of 8086-based processors up to the Pentium with focus on accuracy. Great range of customizability of virtual machines. Many available systems, such as the very first IBM PC 5150 from 1981, or the more obscure IBM...
    Downloads: 89 This Week
    Last Update:
    See Project
  • MongoDB Atlas runs apps anywhere Icon
    MongoDB Atlas runs apps anywhere

    Deploy in 115+ regions with the modern database for every enterprise.

    MongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
    Start Free
  • 10
    Tasmota

    Tasmota

    Alternative firmware for ESP8266 with easy configuration

    Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Unless your Tasmota powered device exhibits a problem or you need to make use of a feature that is not available in the Tasmota version currently installed on your device, leave your device alone - it works so don't make unnecessary changes! If the release version (i.e., the master branch) exhibits...
    Downloads: 66 This Week
    Last Update:
    See Project
  • 11
    libusb

    libusb

    A cross-platform library to access USB devices

    libusb is a library for USB device access from Linux, macOS, Windows, OpenBSD/NetBSD, Haiku and Solaris userspace. It is written in C (Haiku backend in C++) and licensed under the GNU Lesser General Public License version 2.1 or, at your option, any later version. libusb is a C library that provides generic access to USB devices. It is intended to be used by developers to facilitate the production of applications that communicate with USB hardware. Using a single cross-platform API, it provides access to USB devices on Linux, macOS, Windows, etc. ...
    Downloads: 41 This Week
    Last Update:
    See Project
  • 12
    <<Hack|Track GNU/Linux

    <<Hack|Track GNU/Linux

    Distro Penetrasing Live System Burn to USB Flash Disk & Run.

    <<Hack|Track GNU/Linux is an open source operating system developed by the HTGL Project from Indonesia which provides penetration testing.
    Leader badge
    Downloads: 112 This Week
    Last Update:
    See Project
  • 13
    Memtest86+

    Memtest86+

    Stand-alone memory tester for x86 and x86-64 architecture computers

    Memtest86+ is a free, open-source, stand-alone memory diagnostic tool designed to thoroughly test system RAM beyond standard BIOS checks. It runs independently of any operating system, allowing it to access nearly all available memory without software or UEFI library limitations. Supporting x86, x86-64, and LoongArch64 architectures, Memtest86+ works on a wide range of modern and legacy hardware platforms. The tool can be booted directly via BIOS or UEFI, or through compatible bootloaders,...
    Downloads: 58 This Week
    Last Update:
    See Project
  • 14
    simplewall

    simplewall

    Simple tool to configure Windows Filtering Platform (WFP)

    simplewall is an open-source Windows application that provides a user-friendly firewall control interface powered by Windows Filtering Platform (WFP), enabling users to block or allow outgoing and incoming network connections without diving into complex OS settings or command-line tools. The app presents a clean, intuitive UI where users can define rules based on process names, IP addresses, ports, and protocols, making it possible to restrict apps from accessing the internet or control...
    Downloads: 49 This Week
    Last Update:
    See Project
  • 15
    OpenHardwareMonitor

    OpenHardwareMonitor

    Free open source tool for real-time PC hardware sensor monitoring

    Open Hardware Monitor is a free and open source hardware monitoring application designed primarily for personal computers. It provides real-time insights into key system metrics such as temperatures, fan speeds, voltages, load percentages, and clock speeds by reading directly from sensors embedded in CPUs, GPUs, motherboards, and storage devices. The tool supports a wide range of sensor hardware found on modern systems, including Intel and AMD processors, NVIDIA and AMD graphics cards, SMART...
    Downloads: 57 This Week
    Last Update:
    See Project
  • 16
    XClicker

    XClicker

    Fast gui autoclicker for x11 linux desktops

    XClicker is an open-source, easy-to-use, feature-rich and blazing-fast Autoclicker for linux desktops using x11. It is written in C and uses the gtk framework. The user interface may look different depending on what gtk theme you are using. The highest I have got with it was around 750cps, but that was still with 1-millisecond interval. With 0 millisecond interval, the focused application may freeze. Safe mode, to protect from unwanted behavior. Autoclick with a specified amount of time...
    Downloads: 36 This Week
    Last Update:
    See Project
  • 17
    WinDiskWriter

    WinDiskWriter

    Windows Bootable USB creator for macOS

    Windows USB disk creator for macOS. You can use this app to create bootable universal USB Windows installers that support both UEFI and Legacy BIOS modes. With this USB drive, you can install and enjoy Windows on your PC, Intel Mac, or certain Virtual Machines. WinDiskWriter knows how to make a bootable drive for each Windows Image type. You can bypass TPM, Minimum RAM, Secure Boot, and some other System Requirements set by Microsoft for Windows 11. You can create an all-in-one USB drive...
    Downloads: 42 This Week
    Last Update:
    See Project
  • 18
    OpenWrt

    OpenWrt

    A Linux operating system targeting embedded devices

    OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it;...
    Downloads: 32 This Week
    Last Update:
    See Project
  • 19
    DeSmuME

    DeSmuME

    DeSmuME is a Nintendo DS emulator

    In this version we have added support for high-resolution 3D rendering. Try the new “GPU Scaling Factor” feature to increase the 3D resolution beyond the native resolution of 256×192 pixels. Also, the Cocoa frontend sees continued radical enhancements and while the Windows frontend sees some new incremental enhancements. DeSmuME is a very CPU demanding app. While many users will see DeSmuME as a toy (and use it as such), it is actually a very sophisticated piece of software with lots of...
    Downloads: 31 This Week
    Last Update:
    See Project
  • 20
    Arduino core support for STM32

    Arduino core support for STM32

    STM32 core support for Arduino

    This repo adds the support of STM32 MCU in Arduino IDE. This porting is based on STM32Cube MCU Packages including the HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls. The Low-Layer (LL) APIs, a lightweight, optimized, expert-oriented set of APIs designed for both performance and runtime efficiency. CMSIS device definition for STM32. Arduino.cc IDE allows to add easily new board thanks the "Boards Managers". More information...
    Downloads: 25 This Week
    Last Update:
    See Project
  • 21
    TaskExplorer

    TaskExplorer

    Powerful system task manager

    TaskExplorer is a powerful system task-manager / process-inspector tool designed for Windows that goes well beyond the capabilities of the built-in Task Manager. It provides real-time insights into running processes, threads, open handles, network sockets, memory usage, modules loaded, and more — all in a unified, fast, and efficient GUI. Rather than scattering information across tabs or dialogs, TaskExplorer displays detailed data in a panel layout: when you select a process, the lower...
    Downloads: 40 This Week
    Last Update:
    See Project
  • 22
    syslog-ng

    syslog-ng

    Log management solution that improves the performance of SIEM

    syslog-ng is the log management solution that improves the performance of your SIEM solution by reducing the amount and improving the quality of data feeding your SIEM. With syslog-ng Store Box, you can find the answer. Search billions of logs in seconds using full text queries with Boolean operators to pinpoint critical logs. syslog-ng Store Box provides secure, tamper-proof storage and custom reporting to demonstrate compliance. syslog-ng can deliver data from a wide variety of sources to...
    Downloads: 20 This Week
    Last Update:
    See Project
  • 23
    iSH

    iSH

    The Linux shell on iOS

    iSH is an open source project that allows for a Linux shell environment to run locally on your iOS device. It does this through a usermode x86 emulation and syscall translation. With iSH you can run Linux applications and programs on iOS, access the Alpine package manager, and install programs with apk add <name>. iSH also features a keyboard addition that makes navigation a whole lot easier.
    Downloads: 20 This Week
    Last Update:
    See Project
  • 24
    xrdp

    xrdp

    An open source RDP server

    ...Reconnect to an existing session. Session resizing (both on-connect and on-the-fly). RDP/VNC proxy (connect to another RDP/VNC server via xrdp). xrdp primarily targets GNU/Linux operating system. x86 (including x86-64) and ARM processors are most mature architecture to run xrdp on. Most Linux distributions should distribute the latest release of xrdp in their repository.
    Downloads: 56 This Week
    Last Update:
    See Project
  • 25
    SmartDNS

    SmartDNS

    Local DNS server to obtain the fastest website IP

    SmartDNS is a local DNS server. SmartDNS accepts DNS query requests from local clients, obtains DNS query results from multiple upstream DNS servers, and returns the results with the fastest access speed to clients, improving network access speed. At the same time, it supports the designation of specific domain name IP addresses, and high-quality matching to achieve the effect of filtering advertisements. Different from all-servers of dnsmasq, smartdns returns the resolution results with the...
    Downloads: 29 This Week
    Last Update:
    See Project
  • Previous
  • You're on page 1
  • 2
  • 3
  • 4
  • 5
  • Next
MongoDB Logo MongoDB