Search Results for "microcontroller"

Project: Olympus is an engineering project that utilizes an Arduino Nano microcontroller to create an electronic payload that records altitude, g-forces experienced by the rocket, as well as roll rate. Included with the code is a 132 page Project Manual that takes you through the design and construction of the electronic payload. It also includes sections on the construction of the Estes Olympus rocket. A detailed code review of each section of code is included.

Project: Icarus is a proof of concept model rocketry research project that brings several individual projects together into a single model rocketry research launch vehicle. This specific project includes an avionics payload, temperature sensors along the body, and a video camera. The sensors record the heat buildup inside the body tube as the solid rocket motor burns and fires the ejection charge. The sensors are placed in three different locations along the body tube to provide data on the...

If you do a search for model rocket electronic payload, you will see a lot of entries for medium to high power, large diameter rockets. These types of rockets are large, typically 80mm (3.1 inches) in diameter or larger. These rockets are flown in large open areas, often deserts and dry lake beds. These larger rockets also use larger propellants, typically in the High Power Rocketry (HPR) range of “H” and above impulse level. Not only do these motors require you to be certified in HPR, the...

Simple Dumping Monitor Library (DumpMon) for Arduino-compatible ATmega microcontroller based boards allow to display either memory, registers and timer dumps and also interrupt vectors table dump. Beginning since version 0.6 functions of simple symbolic debugger are added. Being compiled the library requires about 11 KBytes of program memory (15 KBytes for Arduino MEGA). Requirements to RAM memory don't exceed 1 KByte (277 Bytes for dumpmon.pde example, 377 Bytes for dumpmonDebug.pde).

Tiny8051 is small 8051 microcontroller simulator written in C#. Project was created for educational purposes, to show how µP works by using clean visual interface and debugging. Note: communication over serial port was not implemented, because there was no demand for it.

YASP (Yet Another Simple Processor) is a 8-bit microprocessor with microcontroller capabilities (I/O ports, REQ, ACK) that can be used as a small computer for educational purposes. Its development environment includes simulators and assemblers.

The aim of this project to develope a microcontroller firmware based on the Microchip PIC18F series. The development is based on studys. The goal is to implement an application which runs on a customized and self designed microcontroller board.

Goal of this project is to make a working Intel 8051 simulator. It covers also some I/O devices like keypad, LCD screen and GUI in Qt.

Microchip's PIC simulator. Simulates a circuit with dispositives as a P16F84 microcontroller, LEDs, displays and LCDs. Extensible with plugins.

Visual GUI programmer for Attiny26 microcontroller for outputting assembly, assembling into hexedecimal and uploading to hardware with an intuitive interface (Tekbots-OSU).

A collection of tools to tokenize PBASIC source code and send it to a BASIC Stamp microcontroller.