Search Results for "uart"

FreeMDU is an open-source toolkit that provides both hardware and software solutions for communicating with Miele appliances through their often overlooked optical diagnostic interface, effectively offering an accessible alternative to the proprietary Miele Diagnostic Utility used by service technicians. This project includes reverse-engineered protocol support, a terminal user interface for diagnostics, and firmware that can act as a USB-UART bridge or standalone communication adapter for home automation systems. Developers and tinkerers can use FreeMDU to read diagnostic codes, monitor appliance internal states, and even integrate device feedback into platforms like Home Assistant using MQTT, making it valuable for repair, automation, and monitoring applications. The repository’s components are split into multiple subprojects.

Open source cross platform flash program for the STM32 ARM microcontrollers using the built-in ST serial bootloader over UART or I2C

A small command line debugger written in C# that communicates with the debugging unit inside the IceBoy CPU via UART.

periph is a Go library that unifies hardware I/O on single-board computers and embedded Linux devices, exposing clean interfaces for GPIO, I²C, SPI, UART, PWM, and more. Its philosophy is “no daemon, no codegen”—you link a Go package and speak directly to the hardware via stable abstractions, keeping deployments simple and auditable. The project auto-detects host capabilities at runtime and selects the best driver backend, smoothing over kernel and board differences across Raspberry Pi, BeagleBone, and other platforms. ...

The program has been written in order to copy Atari 8-bit disks to ATR images on a PC. For this purpose the software emulates the behavior of an Atari SIO disk drive.

ocapi is an open source driver collection for MSP430 and derivative processors. It provides a C language application programming interface (API) for deploying individual processor capabilities. Current modules support serial communication via UART, I2C and SPI, digital I/O (GPIO), analog-to-digital conversion (ADC), Timers and so on. ocapi aims at being independent of the development host platform. So it should work, no matter if you live in the Windows, Linux or Mac world. ocapi is used as the hardware abstraction layer for the MSP430 port of the Takatuka Java virtual machine (JVM). ...

...The minimum JVM requirements are either Java ME/CDC 1.4 (Foundation Profile), or Java SE 8 (profile compact1). The library provides remote access and control, supporting KNXnet/IP, KNX IP, FT1.2, TP-UART, and KNX USB. Data exchange is supported on link layer using EMI 1/2 and cEMI, KNX data point types, application/management layer, as well as message buffering.

PK2Aux is a library and suite of command-line utilities for using the Microchip PICkit2 programmer device for purposes other than programming (such as the generic pin controls, serial UART, and logic analyzer modes provided by the Windows software).

The Beaglebone Black project presented here is a software written by Python and Qt and is intended to show the simple control of inputs and outputs (GPIO), the graphic course of input signals GPIO, the configuration and sending and receiving of data via the UART interfaces, the display of the PIN configuration of the Beaglebone Black and the graphic display of the signal course at the analog inputs. The software runs on the BBB under Debian 8.9 and on Linux computers (as a demo). It is intended to demonstrate the interaction of software with hardware and to encourage the development of peripheral hardware that works with the software described here. ...

PyRadmon Reborn. This project started after the original programmers quit supporting it. The project now contains support for audio*, has a version that supports two Geiger counters** and a cleaner, more stable code. * = PyAudio is used as library for the audio support. ** = The two counters both run in their own thread. UPDATE-2015-2: * Added timeouts to sockets to prevent crashing of the script. * Updated some comments. UPDATE-2015-1: Since there have been some passed time...

This project is about a light controlling system with a 4 RGB-LED channels to run different modes: • autonomously w/o PC performing HSI2RGB transformations and running through the color hues (with dimmable brightness) • remote operated by PC or embedded user software using the provided C++ Software library (based on Boost libraries) • ideal platform for color experiments with your RaspberryPi The system consists of 4 layers: • PCB with Atmel ATmega16 and FT232RL USB interface (Eagle forat) • Firmware for applying PWM, UART communication and integrated colorspace transformations (AVR-ASM) • C++-Software for providing a HTTP-Server, a Dreambox picture grabber and basic light sequence player • HTML5/JavaScript application for remote controlling and configuring the system via Webbrowser Please use the SVN browser for accessing the whole development snapshot and getting an current tarball!

This is a simple command line tool to customize CP2103 USB to UART bridge controllers in home-grown hardware. VID, PID, product name string, serial number string, and release version of the device can be changed next to GPIO port modes.

Tiny Shell provides the minimum you need to implement shell facilities into a small system. For instance, add a shell to your embedded platform as soon as you can read/write bytes from the UART.

This is a driver module for linux written in C language for the 310 apsx rfid reader. This device use the communication via uart (interrupt based) for dialect with a normal pc.